7 Secrets About Ghost Immobiliser Install That Nobody Can Tell You
Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discrete, doesn't employ keys or LEDs and is concealed in the vehicle's wiring.
The user can also deactivate the system temporarily using Transport Mode when renting their car. This guide will take you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning, and relay attacks. The system connects directly to your car's ECU and is protected by a unique pin code of your choice. It's undetectable to thieves using diagnostic scanners or other advanced methods, and is unable to be disabled by circuit cuts.
The system is simple to use, however professional installation is advised to ensure a perfect connection to the ECU of your vehicle. Installers approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking system or alarm to complement the protection package for your vehicle.
The first step is to disconnect your battery to prevent accidental airbag deployment or short circuits. After this is completed the installer is able to safely begin work. Hand tools are essential for making precise connections and a multimeter can be used to check electrical values and safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring neat. The Ghost Immobiliser user's manual will give specific instructions that are specifically tailored to your specific model.
It is essential to choose the right grounding spot that is free of dirt or paint during installation. The installer should also make sure the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. Based on the model, these wires may require soldering or plugged in. A quality connector is recommended to ensure a sturdy and reliable connection.
ghost immobiliser car can be activated by the customer once the installation is completed. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. The customer has to press the icon for service on the dashboard five times in 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great choice for anyone who frequently rents their vehicle on platforms like Turo. An immobiliser can cut down on the cost of insurance, as it reduces the risk of theft.
Getting Started
You won't have a problem with an autowatch immobiliser if you want to protect your vehicle from theft. It will stop your car from being started the theft or copies the key. This is due to its high-tech technology that is designed to prevent the engine from running without the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN, allowing direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your car. This is the ultimate system to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing a ghost immobiliser can be a simple process, but it is important to follow the steps carefully to avoid electrical issues and system malfunctions. First, you must locate a 12V power supply and a good grounding on the car's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering methods to create an effective connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid electrical short circuits.
After the wires have been connected, you can connect the battery and turn on the engine to test the immobiliser's functionality. When everything is functioning correctly, you can install it in a secure location beneath the dash or anywhere else in the vehicle. Be sure to conceal it well so that a thief cannot alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car burglars. It is resistant to hacking and key cloning and is not able to be disabled without the code. The device is simple to use and can be set up to the service valet setting to ensure that your vehicle won't be activated if you bring it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It connects directly to your car's CAN bus network and communicates with the ECU which makes it virtually undetectable as an addition to your car. Ghost Immobiliser doesn't interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals and instead uses CAN data to communication with your ECU. It also doesn't require modifications to your existing key fobs.
Enter your sequence for disarming (either two or one buttons) and then turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. Now you can begin driving your car safely.
Once installed, Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you need to give your car to service or valet park.
To complete the Ghost Immobiliser installation, you'll need to identify a source of constant power (12V) and a grounding point. Make sure both are well-insulated and can be touched. Cable ties are also suggested for bundling and securing the wires. This will reduce the risk of theft by thieves. To avoid making mistakes, double-check these points and mark them using labels or tape. It's important to inspect every connection for signs of wear and tear. Connections that are loose can cause malfunctions in the system, so make certain that they are securely fixed and well-insulated. Don't forget to test your Ghost Immobiliser after the installation is completed. This will make sure that the unit functions correctly, and that all connections are safe and well-insulated. Be sure to fix any problems immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your vehicle's ECU to prevent unauthorised engine start. Its innovative technology safeguards your vehicle against hacking and key cloning and other methods commonly employed by thieves to steal cars. The Ghost also works in conjunction with existing alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unparalleled features and discreet design make it a preferred option for car enthusiasts and security-conscious drivers too.
It is crucial to follow the steps of installation to ensure correct integration of the Ghost Immobiliser. Refer to the wiring diagram for the vehicle as it will assist you in locating and connecting the wires. You'll need to determine the grounding and power sources. Once you've identified these then you'll be required to mark them so that they are easy to locate during the installation process. It is essential to use top-quality materials and tools. Hand tools are essential to assist you in making precise connections. A multimeter will check electrical values, and ensure safety. Insulation tape and cable tie will keep all connections neat. A Ghost-specific user's guide is also available.
Before you begin installing it is essential to test the system by entering the PIN code, then starting the vehicle. This step will confirm the immobiliser is working as it should and will stop vehicle starts that are not authorized. It's recommended to perform this procedure regularly as part of your routine inspections of the vehicle to ensure the system is operating correctly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will protect your car from thieves who might steal your car. It will ensure that no one can drive away with your vehicle without having the correct PIN code. The Ghost can also be used with a Thatcham-approved tracker to detect any attempt at tampering or theft, allowing you to locate your vehicle if it's stolen.
The Ghost is compatible with a range of vehicles, including those made by most major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA Registered installer This certification ensures that we adhere to strict guidelines and procedures for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that all installations are performed safely and correctly.